Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

12.06.2025 05:51

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

These are simplified answers to the original question, and does not change anything I wrote above.

[image of Common-mode choke]

This one hit behind the barn.

What is the most popular song that includes the word "you"? Are there any other songs that use "you" multiple times?

At one ohm, the resistor has a maximum of 1 watt power.

Here is a simplified AC power diagram.

Upvotes:

What is your craziest college sex story?

First Sentence:

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

But… the neutral is now “floating” because of the 1 ohm resistance.

Do you suck dicks with no reciprocation?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

(Dc diagram shown, AC is similar).

Summer Game Fest 2025 LIVE: Everything announced during the gaming showcase - Tom's Guide

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

So, the voltage could go up to 500 volts, and the fuse will not open up.

but this device (an Inductor) … impedes the rapid changes in the current.

What is the best way to get revenge on people who hurt you?

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

He then asserts :

I post the exact comment here.

Building the 'Moonhouse': Q&A with artist Mikael Genberg - Space

Now when you have a certain ac resistance, then a current flows in a loop.

It seems Mohan does not understand the difference between a comment and an Answer.

a photo is worth a thousand words.

Here's a fresh look at Clockwork Revolution, coming "in due time" - Eurogamer

This is the picture of an electronic coil of wire wound around a core of magnetic material.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

But it can get overloaded, and no longer works.

2 Popular Dividend Stocks I Wouldn't Touch With A 10-Foot Pole - Seeking Alpha

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

For this case there are devices called Metal oxide varistors (MOV).

This is where this question deviates from being a 'generic' question, and becomes more specific.

‘Ballerina’ Dances To $3.75M+ In Previews & Great 93% Audience Score Equal To ‘John Wick 4’; ‘Lilo & Stitch’ Crosses $300M+ – Friday AM Box Office Update - Deadline

One is “what exactly is in a ‘surge protector’ ? ”

2024–10–16 [ OO OLAOYE OYEBODE ]

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Win a free Steam Deck OLED, thanks to Nvidia - PCGamesN

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Atheists claim that Earth is 10 billion years old, yet there are no fossils that old. What do you have to say for yourselves for lying?

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

2024–10–14 [Omar Gharbi Omar Gharbi ]

so, what happens?

I have a "fat pussy" and I'm super self cautions about it. Do guys think it's gross?

At least they know the answer if they wanted it.

This is where the MOV conducts again, and dissipated the energy.

Edit 2024–10.

Sky's Courtney Vandersloot tears right ACL, will miss rest of season after leaving loss to Fever early - Yahoo Sports

nine

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

It also is a device that limits the change in current flow.

American Airlines sent a plane from the US to Italy that was too big for its destination airport and wasn't allowed to land - Business Insider

The third is lightning and “how it gets conducted into a home.”

This is 'the assistant's answer'

He then describes Rainy Season and Lightning.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

An AC voltage/ current source, and an ac inductive load.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

These devices are installed between the “hot” and “neutral” and protective ground.

Barnstars:

The bolt then partially travels down the line to your home.

A fuse is a non-resetable over current circuit protector.

The other is “what does a “fuse” do?”

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

The MOV will conduct when the voltage exceeds 50% of line voltage.

eight

What does a fuse do?

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

This device then solves the entire problem.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

There are three different concepts here that are getting confused.

Because the load is inductive, the current lags the voltage.(by a bit).

A circuit breaker is similar, but is resettable.

He then describes the function of a fuse.

There are two important concepts here.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

the problem then depends on "how fast does the fuse operate?".

What is lightning?

[old diagram got deleted by accident]

One

In schematic diagrams this is the symbol for a fuse:

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

2024–10–10[John johnson John Johnson ]

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Can the fuse protect the electronic devices from lightning instead of a surge protector.

but I think this circuit , shows a few more pieces.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

what exactly is a ‘surge’ protector?

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.